Powered by Blogger.
 
 
21.1.13

repair USB write protection


wirte protect ျဖစ္ေနတဲ့ stick ကို ကြန္ပ်ဴတာနဲ႕ခ်ိတ္ၿပီး .Reg ဖိုင္ေလး run ေပးလိုက္ၿပီး ကြန္ပ်ဴတာကို restart ခ်ေပးလိုက္ရင္ရပါၿပီ။


>> Download <<
အဲဒီနည္းေလးနဲ႕မွာမရင္ ေနာက္တစ္နည္းရွိေသးပါေသးတယ္ cmd ကေန command ေလးနဲ႕ ျပင္ၾကည့္ၾကမယ္ေလ။

အရင္းဆံုး

1. Start Menu - All Programs - Accessories - Command Prompt - right-click - Run as Administrator...
2. When the command console opens, type DISKPART
3. List the drives by typing LIS DIS  
4. Select the USB drive by typing  SEL DIS 1         (if disk 1 is your USB drive)
5. Inspect the details for that disk by typing  DET DIS

DISKPART> det dis

TOSHIBA MK2559GSXP USB Device
Disk ID: EF78DCD3
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : Yes
Read-only  : Yes
Boot Disk  : No
Pagefile Disk  : No
Hibernation File Disk  : No
Crashdump Disk  : No
Clustered Disk  : No
6. Type ATT DIS CLEAR READONLY    to clear the ReadOnly attribute and then type DET DIS again to check it has been cleared.
7. Finally type EXIT  to quit Diskpart

အေပၚက စာေတြ ဖတ္ရတာၾကာတယ္ဆိုရင္ေတာ့ေအာက္က ပံုေလးကိုေဒါင္းၿပီးၾကည့္လိုက္ပါ အဆင့္အားလံုး အဲဒီအတိုင္းရိုက္လိုက္ပါခင္ဗ်ာ။

8. Now unplug the USB disk and re-insert it into the USB port.

0 comment:

Post a Comment

နည္းပညာ၊ Software ႏွင့္ နည္းပညာ စာအုပ္မ်ား မွ်ေ၀ရာ....
www.pyayblogger.com
မွၾကိဳဆိုပါတယ္....

Updates Via E-Mail

Popular Posts

Labels