PC Disk Clone X v11.5 (32Bit)

မဂၤလာပါခင္ဗ်ာ...... ကြန္ပ်ဴတာအတြက္ System Migration and Disk Clone, Backup and Image, Recover and Restore  စတဲ့ လုပ္ေဆာင္ခ်က္ေတြကို လုပ္ေဆာင္ေပးႏိုင္တဲ့ PC Disk Clone X v11.5 ကိုမွ်ေ၀ေပးလိုက္ပါတယ္.... အေသးစိပ္သိလုိလွ်င္ (အသံုးျပဳပံုႏွင့္တကြ) Home Page ကို click ၿပီးမူရင္းဆိုက္မွာ ေလ့လာႏိုင္ပါတယ္... အျမဲအသံုးျပဳႏိုင္ဖို႔အတြက္ Patch ဖိုင္ပါ၀င္ၿပီး Freehostina မွာ တင္ေပးထားပါတယ္ ယူသြားလိုက္ပါခင္ဗ်ာ...

PC Disk Clone X is a Windows Backup program that allows cloning of computer hard drives to backup data or migrating system to another PC. It copies all data on physical level with a full support of IDE, SATA, SCSI, USB, Firewire Interfaces. Besides these compatabilities, PC Disk Clone X copies at a high speed of 7GB per miniute.

PC Disk Clone X is especially programmed for external backup and computer replacement . If you are going to back up your computer to external USB or Firewire disk, or going to replace your old computer with new one without reinstalling Windows and software in the new one. PC Disk Clone X is the right tool for you. With the help of PC Disk Clone X, you can easily copy entire hard drive to a new one. Your Windows System, software, personal files and music will be exactly there. The ease of use allows not only PC beginners but technicians and professional users to handle the tasks easily.

System Backup/Image & Drive Clone Software

Cloning or Imaging Windows 7, 8, Vista, xp and server 2008.
Restore System to dissimilar hardware.
Backup Windows while running on Windows.
Continue to work while backup is in progress.
Back up to external USB, Firewire Drives faster.
Copy Hard Drive at high speed of up to 7GB/min.
Automatic Downsizing and Upsizing Disk & Partition Capacity.
PC Recovery CD/DVD USB maker – PC Win Boot included FOR FREE!

System requrements:

Windows XP, 2003 Server, Vista, 2008, 7, 8, Server 2008, PE, Windows-X64
Administrative rights to execute PC Disk Clone
1+ GB disk space, 50MB+ RAM

Disk to Disk function

If you are upgrading or downgrading your computer hard drive to another one, the new hard drive has to be the same interface as the old one, otherwise your system on the new hard disk won't boot due to the change of hard drive interface.

Moreover, your target disk selected in step (2) shown in the picture should contain ZERO partitions. Please go and delete all the partition if any exist and restart PC Disk Clone.

Options contains "Used Only" which indicates PC Disk Clone will only clone data blocks which contains real data, and "Shadow Copy" which is used when cloning System drive in order to make sure every system data are correctly cloned.

To start, first choose your source disk in step (1), then choose destination disk in step (2). By default, you can leave the options untouched. You might remove "Used Only" if you want to make a bit to bit exact clone. Finally, click Start to start the task.

Partition to Partition function

Partition to Partition function is very similar to Disk to Disk, except information being displayed. The steps are also the same, you might refer to the Disk to Disk tips in above. 

Disk to Image function

Creating hard drive image is the most commonly used method to backup system and data. To start, first choose source disk in step (1), then choose the folder where you want the image file to be stored. Remember, This folder location cannot be within any partitions in the source disk. If it does, your system will crash and the backup will fail. The reason is because, you are trying to store the image into the disk itself, when image size increases, disk data size increases and the disk space will evenually full with no space at all. This is dangerous and deserves you attention.

Then, create the subfolder as you wish, and create the image file by clicking the "New PCHD File" button. You will also need to make sure that the space the images stays is enough to hold the disk data.

Finally, click Start and wait untill the progress goes to 100%.

Image to Disk function

Image to Disk is used when you are recovering your system. The oporation is quite straight forward. First choose the source imae (PCHD file), then choose the target hard disk. Finally, click start. 

Partition to Image function

Partition to Image function is to backup a partition into PCPT image file. The operation is similar to back up an entire disk. 

Image to Partition function

Image to Partition is to recover a particular partition from a PCPT image file. The operation is similar to recovering an entire hard drive. 

Trouble shooting

If you encounter problems of of booting Windows Vista / 7 from your new hard drive and getting the error shown below. There two ways to fix the error. One automatic but you will need a Windows Installation which might not always true to everyone, the other way is manual by using Windows PE Boot CD created by PC Win Boot.

Temporarily disconnect any other hard disks except the new one. It's important and you are responsible for disconnecting the right ones.

Option I (Automatic repair):

Put your Windows setup DVD or your System Repair Disc in the drive and restart your PC. Assuming you've properly configured your BIOS to boot from CDs/DVDs before hard drives (or you can press F12 if your PC supports it to boot from the CD), you should get a prompt asking you to "Press any key to boot from the CD/DVD..."

Press a key, and the CD will begin to load. If you are using your Windows Installation CD, you'll see a dialog asking you want to Install Now, or in the lower left corner, an option to "Repair your Computer," which you'll want to click. 

Select "Repair your computer" to continue.

On the next window, choose the Windows 7 installation that you'd like to perform the repair on.

Click the Next button. Proceed with the process by choosing "Startup Repair" to fix the boot problem.

Option II (Manual Repair)

First, use your rescue cd which created before using PC Win Boot. Set up the BIOS to boot from the CD. You should get a prompt asking you to "Press any key to boot from the CD/DVD...", press any key to continue, after all, you will see a screen like below:

Next, close the PC Win Boot Menu window by clicking the [x] on the right. you will see a command line window.

We are assuming that your Windows 7 installation is by using its default setting which has a small active 100MB primary partition containing all the boot files and a partition which contains all your C drive data (as shown in the first picture below). 

Before typing commands shown below, run "diskpart" first.

Now type the command as shown in below, step by step:

1. "select disk 0"
2. "list partition"
3. "select partition 1"
4. "detail partition": In the output, you will see that this partition is an active partition, which means system are booting from this partition.
5. "remove letter=C": this partition is a hidden partition and it shouldn't be assigned to any drive letter.

1. "select partition 2": This partition should be your original C drive. To verify that, you can exit diskpart for a second and type "D:" and "dir" to see if there are folders like "Windows", "Program Files" etc. Now go back to diskpart, type "selection disk 0", "selection partition 2";
2. "detail partition": You should notice the drive letter "D" in the output;
3. "remove letter=D"

1. "assign letter=C": correct the system partition to its right letter.
2. "select disk 0"
3. "uniqueid disk id=C3E8A9B1": The string "C3E8A9B1" is a random hexadecimal form 4 bytes number. You can assign any valid hexical 4 bytes number as you wish. But please remember the length of the string is exactly 8.
4. "exit"

1. "bcdboot C:\Windows": Now you have successfully fix the boot manager error.
2. Reboot your computer and take out the Recovery CD. You should be able to boot from the new hard drive successfully.

PC Win Boot

You will need PC Win Boot to create your windows rescue CD/DVD. For help related to PC Win Boot please go to here.

PC Disk Clone X v11.5 (32Bit)

Freehostina

>>>  Download  <<< 

 

Download ယူနည္းမ်ား 

 

>>>   ၾကည့္ရန္  <<<

 ဒီ Post ေလးက သူငယ္ခ်င္းတို႔အတြက္ အဆင္ေျပတယ္ဆိုရင္ FB Like လုပ္ေပးၾကပါခင္ဗ်ာ... 

Like လုပ္ေပးျခင္းျဖင့္ မိမိရဲ႕ FB ေပၚမွာ Post ေလးေရာက္သြားမွာပါ....

 ေက်းဇူးတင္ပါတယ္....